CAUTION:
SHOCK HAZARD
Disconnect appliance from
electric power before cleaning.
CAUTION:
HOT SURFACE
Exposed surfaces can be hot
to the touch and may cause
burns. Allow appliance to cool
before servicing.
MAINTENANCE INSTRUCTIONS
12
ADJUSTMENTS AND LUBRICATION
PRECAUTIONS:
Turn control knob to OFF. Unplug warmer
Allow drawers to cool before proceeding.
Remove drawer pans and Humitrol racks
FREQUENCY:
Minimum - Every 2 weeks recommended.
TOOLS:
Screwdrivers, Phillips (+) and flat blade (-).
Nut drivers, 3/8” and 7/16”.
Food-grade lubricant.
1. Check slides on cabinet and drawers for cleanliness.
2. Check all rollers on cabinet and drawers for cleanliness and
tightness. Lubricate.
3. Check cabinet drawer stops for operation. Stops must “snap”
down positively. Clean and adjust as required.
4. Check cabinet heating element fasteners for tightness.
5. Check all cabinet drawer catches for tightness and operation.
Lubricate. Be certain roller is “out” before attempting to install
drawer.
6. Check temperature sensor. Sensor must be securely mounted in
the appropriate holder.
7. Check drawer faceplate and handle fasteners for tightness.
8. Check drawer catch clip for tightness.
9. Examine condition of gasket. Arrange repairs for torn or
damaged drawer gaskets.
10. Reinstall drawers and check for proper operation.
Procedure is complete.
047 p/n 307538 OpM Free-Standing Drawer W
armer w/ Solid State Control
1
6
5
4
2
3
1
1
2
2
8
9
3
7
IL1936, Rev. -, M048