manualshive.com logo in svg

Wells RCP-100, Operation Manual

The Wells RCP-100 Operation Manual is essential for efficient and seamless usage of our advanced product. This comprehensive manual provides detailed instructions and guidelines for optimal performance. Download your free copy now from our website for a hassle-free experience.

Share
Download
background image

8 

CONDENSER COIL CLEANING INSTRUCTIONS 

 
The condenser coil must be kept clean to allow adequate air flow for 
proper heat dissipation.  Recommend this procedure be performed 
monthly. 
 
1. Turn POWER SWITCH 

OFF

.  Disconnect unit from electrical 

power. 

 
2. Remove louvers or access panel to allow coil to be reached. 
 
3.    Using a stiff bristle brush, brush lint and debris from the condenser 
       fins.  Brush vertically, top to bottom.  Collect and discard all lint and 
       debris gathered from this operation 
 
      

IMPORTANT:  

The fins of the condenser coil are delicate and   

       easily damaged.  Use care to brush only in a vertical motion to 
       avoid damaging the coil fins. 
 
4. Wipe the fan blades to remove accumulated lint. 
 
5.    Reconnect to electrical power.  Test for proper operation. 

CAUTION: 

Personal Injury 
Hazard 

 

Disconnect appliance from 
electrical power before   
cleaning condenser coil. 

 

CAUTION: 

Personal Injury 
Hazard 
 

Condenser coil fins are sharp.  
Use care to avoid cuts while 
cleaning the condenser. 

MAINTENANCE INSTRUCTIONS  

Summary of Contents for RCP-100

















Reviews:

No comments

Related manuals for RCP-100

Brands by name

Popular brands

Load more brands