background image

WARRANTY                                                                                    xi 
SPECIFICATIONS                                                                           1 
FEATURES & OPERATING CONTROLS                                    2 
PRECAUTIONS & GENERAL INFORMATION                            3 
AGENCY LISTING INFORMATION                                              4 
INSTALLATION                                                                                4 
OPERATION                                                                                    5 
CLEANING INSTRUCTIONS                                                         6 
MAINTENANCE PROCEDURES                                                  7 
TROUBLESHOOTING SUGGESTIONS  
PARTS & SERVICE                                                                        
CUSTOMER SERVICE DATA                                                       

Thank You for purchasing this Wells Manufacturing Co. appliance. 
 
Proper installation, professional operation and consistent maintenance of this appliance will ensure that it 
gives you the very best performance and a long, economical service life.  
 
This manual contains the information needed to properly install this appliance, and to use and care for the 
appliance in a manner which will ensure its optimum performance. 

TABLE OF CONTENTS 

SPECIFICATIONS 

INTRODUCTION 

 

DIMENSIONS 

HEIGHT 

PLATEN FULLY 

RAISED 

WIDTH 

DEPTH 

 

Model FT-18 

32" 

21" 

27" 

 

 

 

 

 

 

ELECTRICAL 

VOLTAGE 

AMPS 

WATTS 

POWER CORD 

Model FT-18 

208 VAC 1ø 

20.2 Amps 

4200 Watts 

NEMA  6-30P 

 

240 VAC 1ø 

23.3 Amps 

5600 Watts 

 

Summary of Contents for FT-18















Reviews: