background image

CLEANING INSTRUCTIONS

 

 
PRECAUTIONS:      Press MENU 4 (cleaning mode).  Allow toaster to 
                                    cool to 275ºF. 
                                    NOTE:  If MENU 4 has been programmed to       
                                    anything other than 275ºF, press POWER SWITCH 
                                   

OFF

 and allow unit to cool for at least 10 minutes.

                                    Be sure to wear protective gloves. 
 
FREQUENCY:          Daily 
 
TOOLS                      

P

rotective gloves 

                                    Cleanser manufactured  specifically for use on    
                                          toaster surfaces. 
                                    Applicator pad with handle 
                                    Metal spatula with rounded corners 
                                    Clean dry towels. 
 
 

IMPORTANT:

  DO NOT SUBMERGE OR IMMERSE TOASTER 

IN WATER. 

 
Loosen debris on surface of platens with metal spatula. 
 
Apply cleanser to cleaning pad.  Scrub exposed surface of upper      
platens, first, then scrub exposed surface of lower platen. 
 
Wipe exposed surface with a towel moistened with clear water. 
Wipe upper platens first, then lower platen.  Rinse the towels often. 
 
Remove CRUMB TRAY.  Wash and rinse, then reinstall. 
 
Wipe outside surfaces with a towel moistened with clear water. 
 
 
 

CAUTION: 

ELECTRIC SHOCK 
HAZARD 

DO NOT submerge or        
immerse toaster in water. 

 

                       

CAUTION: 

BURN HAZARD 
 

Exposed portions of toaster 
are hot.  Use care when 
working around the platens.  
Use insulated handles to 
raise and lower platens.  
  

CLEANING 

Summary of Contents for FT-18















Reviews: