Click on the "Serial Config” at the starting menu to set the PC COM port connected
with Serial Cable.
Also The Modem can be accessed with Telnet. IP is set at 192.168.1.1 by default,
which can be changed. Type "password" for password.
1 . 2 . 7 C o n f i r m i n g C o n n e c t i o n S t a t u s
Each ports of the Wel+8010S ADSL Modem can be confirmed its connection status by
the following methods;
C o n f i r m t h e A D S L L i n e C o n n e c t i n g S t a t u s
After Wel+8010S ADSL has been connected, normally ADSL sync. LED should be
blanking within some seconds.
It is indicates that ADSL Line is in the status of LINK
C o n f i r m t h e P C c o n n e c t i n g S t a t u s
If LINK LED between the LAN card of the PC and Wel+8010S ADSL Modem's lights
are on,
it means that modem has been connected properly.
C o n f i r m t h e T e l e p h o n e C o n n e c t i n g S t a t u s
It is proper operation if you can hear normal telephone signal sound and no
interruption sound when you pick up the phone,
it means that the operation has been operating successfully.
