SMP181-HLS User Guide
12
Check the small boxes to open output channels. Choose
Protocol
. Enter
IP address, Dest Port
and
Constant Rate
. Click
Apply
before you go to the next step.
Go to
Service Configuration
. Distribute an input TS to the TSIP output Port. Refer to 4.2.4
4.2.4 Configuring Output in Service Configuration
Drag a service to the Decoder
Go to
Service Configuration
, right-click on the TS1 under Board2. Click
Add TS
to generate
an empty TS in Port1. An empty TS contains 0 service.
Long click on a service in the input TS, and drag it to the
Program
in the Decoder Port1 TS1.
Drop it until a blue arrow appears on the left of the
Program
. Click
Apply
.
See the following image. There is an input service (High Definition Jade) in ASI Port1 TS1. After
drag-and-drop operation, you can see it in Decoder Port1 TS1.
DVBCommunity - c
ообщество
профессионалов
ЦТВ
https://dvbcommunity.ru/