SMP181-HLS User Guide
17
Browse
Click to select the software. Then click
Upgrade
to start update process. If it is a
mainboard upgrade, SMP181 will reboot by itself after upgrade is finished. If it is module upgrade,
Go to
Module Configuration
and click
Reboot
to activate the new software.
Erase All
Click to delete all the software. Click the square box in front of
Advanced
to view all
the software loaded in the mainboard. Always contact the manufacturer when there is a software
compatibility problem.
Do not click
Erase All
to delete all the software unless instructed to do so. Do not upgrade
any software without contacting the manufacturer to confirm the compatibility condition in advance,
especially for the unit in a running system. Do not disconnect management port or power off a unit
during upgrade. Otherwise, the upgrade might fail and lead to boot failure. In a boot failure
happened, the user may have to return the unit for factory repair.
5.3 License
License Information is a checklist of licenses. Slot 0 refers to the Mainboard. Even when a module
initialization failure happens due to defective hardware, missing software, or incompatibility problem,
the Mainboard still has the access to the module’s license.
The license file is unique for each module. The user cannot export a license file from one unit
and upgrade it in another unit. Contact your provider if you need license update.
5.4 Import/Export Configuration
Export the configuration of a unit, then you can Import it to this unit for qucik configuration recovery
when needed.
DVBCommunity - c
ообщество
профессионалов
ЦТВ
https://dvbcommunity.ru/
