SMP181-HLS User Guide
5
Status
pages summarize the input and output bitrate in each board.
Module Configuration
is where you set input and output parameters for each board.
Service Configuration
is where to distribute services. See 3.1.4
Equipment Configuration
includes the basic settings for a SMP181 unit.
3.1.4 Service Configuration Introduction
Service Configuration page, see the following image, is the main page to distribute input and output
services. In the input and output configuration areas, only the slots with modules successfully
loaded are visible, except the scrambler which is hidden in Output Configuration Area and it is
configurable by right-clicking the programs in output ports. Board 1 in this page refers to the module
in slot 1. Board 2 refers to the module in slot 2, and so on.
Function of the Main Buttons in
Service Configuration
:
Refresh
Click to refresh input and output configuration or parameters. There are also
Refresh
buttons of
the same function in other pages.
Menu and Main Buttons
Slot and Module Name
Output Configuration Area
Quick Sort
Port and Port Number
Other PID Group
Input Configuration Area
TS
Service Group
Program Name
DVBCommunity - c
ообщество
профессионалов
ЦТВ
https://dvbcommunity.ru/
