Enterprise IP Phone Advanced Phone Functions
69
3)
Pressing the
DSS key
again to disable the recording function, and the flashing
recording icon will be disappeared simultaneously.
4)
Follow the voice prompts to listen to the recording.
To configure a DSS key as URL Record:
1)
Click on
Phone
->
DSS
Key
->
Line
Key
, select one of the keys you want to make
the configuration, there is a pull-down menu in the
Type
field, select
URL
Recorder
from the list.
2)
Enter the condition code in the
Value
field.
3)
Click
Confirm
button to save the changes.
Note:
During a conversation, press this type of DSS key to start the recording process; if
the other party hung up, your phone will turn to the idle status.
Multicast Paging
Multicast is the delivery of a message or information to a group of destination
simultaneously in a single transmission from the source creating copies automatically
in other network elements.
A multicast paging is essentially a predefined broadcast address that the phone is
programmed to listen to. Each phone can be configured to listen to as many as 10
different multicast IP addresses. The priority of the IP Addresses is equivalent to the
stream priority, 1 is the highest, 10 is the lowest. Streams with higher priorities will
overlap those with lower priorities.
Users can configure the phone to send (receive) a Real Time Transport Protocol (RTP)
stream to (from) pre-configured multicast address without involving SIP signaling.
To configure a programmable key for sending Multicast RTP stream via web interface:
1)
Click on
Phone
->
DSS Key
->
Memory Key
. Then choose the desired key you
want to configure as multicast Paging.
2)
Select the key Type as
Multicast Paging
in the pull-down menu;
3)
Enter the
multicast address
(es) (IP: port) in the
Value
field.
4)
Click
Confirm
to save the configuration.
Note:
The multicast address ranges from 224.0.0.0 to 239.255.255.255.
Users can also configure the phone to use a default codec for sending Multicast RTP
stream via web interface:
1)
Click on
Phone
->
Features
.
2)
Select a codec (i.e.,
PCMU
) from the pull-down menu of the
MulticastCodec
configuration item.