Enterprise IP Phone Basic Call Functions
47
out.
2)
After C answered it, A and C can have a private conversation without B hearing
it, then A press the
TRAN
button to complete the transfer.
3)
A will be disconnected from the call. B can talk to C.
To Semi-Attend Transfer via phone interface:
1)
A and B is on an conversation, A press the
TRAN
button to put B on hold, then A
can dial a new number C and press the
OK
or
SEND
button to call out.
2)
While C is ringing, A hang up or press the
TRAN
button. A will turn to hold
status for a short while and then turn to the idle status.
3)
You will be disconnected from the call, when C pick up, B can talk to C.
Note:
Make sure that the SIP server you have registered supports this function.
3-way Conference
Users can establish a three-party conference, during the conversation three phone
parties can communicate with each other.
To establish a conference:
1)
Press the
CONF
button during an active call.
2)
The first call is placed on hold. You will hear a dial tone. Dial the number to
conference in, then press the
SEND
key.
3)
Press the
Menu
key to stop the conference in operation before the call is
answered.
4)
When the call is answered, users can have a private conversation at first. And
then press the
CONF
button, the conference call will now include you and the
other two parties.
5)
Hang up to disconnect all parties.
Network Conference
If you want to make a conference with more than three people, users can open the
function of network conference. This function needs the server’s support.
If you enabled this function, users can put the meeting conference on the server.
To enable network conference via web interface:
1)
Click on
Account
->
Account
X
->
Advance
->
Conference
Type
, there is a pull-
down menu, select
Network
from the list.
2)
Enter the
Conference
URI
.
