Well mPBX-36, User Manual

Page: 81 / 130

mPBX-36 User Manual
Page 81
example, the call in number (Caller ID) is 123456789, mPBX need to send
9123456789 to its trunk when call to this number. You should configure
123456789 as the call back number and add 9 before the callback is placed. You
can add ‘w’ for analog trunks for some delay too.
Figure 3.5.13.3
3.5.14 Speed Dial Settings
1) Options
·The prefix of speed dial
The prefix should be dialed before the speed dial number. Default is *99.
2) Add new speed dial.
·Source Number
The speed dial number.
·Destination Number
The number you want to call.
e.g. The source number is ”123”. The destination number is 5503305.The prefix
number is *99.You can use an extension with any type to dial *99123, then it
will call to number 5503305.
Note : Don’t forget to add the outbound dial prefix if you would like to dial the
speed dial number through trunk.