Well mPBX-36, User Manual

Page: 78 / 130

mPBX-36 User Manual
Page 78
3.5.11 DNIS Settings
DNIS (Dialed Number Identification Service) is a telephone service that
identifies for the receiver of a call the number that the caller dialed
.
Note:
1. DID number is not available in PSTN trunk
2. If DID is not configured here, all the calls via this trunk will show the DNIS
instead of the original caller ID
Figure 3.5.11
3.5.12 PIN User Settings
PIN User are used to manage lists of PINs that can be used to access restricted
features such as Outbound Routes. If user use PIN User call out, system will
auto record the PIN in the call detail records.
1) Options
·Access Code
.Dial this code to access PIN.
·Prompt for Entry
Prompt caller enter the PIN Number.
·Prompt for Entry Failure
Prompt the caller when an invalid PIN is entered.
2) PIN User
mPBX can store a number of PIN Users. PIN Users may be used to keep track of
calls in relation to particular activities or clients. They can also be used to keep
track of calls by particular users or sets of users.
•
PIN entered are checked against those stored by the system. If an invalid PIN
is entered, the PIN is requested again.