8820IP Phone User Manual_ SIP (V1.44)
39
dialplan 1[enable] dddcode 10
iddcode 86 iddprefix 00 dddprefix 0
innerline 1[enable] innerlineprefix 0 callwaiting 1[disable]
fwdnumber 82378009 fwdpoweroff 1[enable]
fwdalways 1[enable] fwdbusy 1[enable] fwdnoanswer 1[enable]
answer 30 digitmap 1[enable]
***************Other Settings***************
password 1234 upgradetype 0[disable]
upgradeaddr [empty]
sntpip 0.0.0.0 daylight 0[disable]
timezone 55[(GMT+08:00)Beijing,Hong Kong,Urumqi]
Ø
Command
set
Syntax description: set keywords value
Usage:
Used to configure password and other running parameters of
PA168X IP phone.
Detailed description:
set iptype X
Set how IP phone gets relevant network parameters. X ranged
from 0 through 3: 0: authorize users set IP address, subnet mask
and router IP address of IP phone manually; 1: use DHCP mode.
With this system, your LAN or router automatically assigns all the
required network parameters to any device connected to it when
the device log on. PA168X IP phone is shipped from the factory
with DHCP on. So, if your LAN or router is configured to use
DHCP addressing, the IP phone’s LAN parameters will
automatically be configured as soon as it is connected to the LAN
