Well 8820IP User Manual Download

Page: 29 / 54

8820IP Phone User Manual_ SIP (V1.44)

device alive. “

nat ttl

” is an integer between 10 and 65535, default value is

20.

●

phone number:

The local phone number or username of this phone,

usually is allocated by system.

●

account

: With SIP system which requires authentication, please put the

username/account into this field.

●

pin:

With SIP system which requires authentication, please put the

password into this field.

●

register port:

The local UDP port registered with server to accept

incoming handshaking messages. The default port number is 5060.

●

rtp port:

RTP port is the port transferring and receiving voice packets

using UDP protocol. This is an even number between 1024 and 65535.

●

tos:

Set the TOS field of the IP header of the RTP packets. The bigger

this value is 0, the higher priority the packet is 224.

●

outbound proxy :

Enable/disable Outbound proxy by checking/clearing

this box. If the system has an Outbound Proxy

，

please set the URI of the

Outbound proxy into “

sip proxy

” and set the domain name of SIP proxy

server into “

domain/realm

”. The default service port is 5060.

Summary of Contents for 8820IP























































Search results

Summary of Contents for 8820IP

Reviews:

Related manuals for 8820IP

Brands by name

Popular brands

Well 8820IP, User Manual

Search results

Summary of Contents for 8820IP

Reviews:

Related manuals for 8820IP

Brands by name

Popular brands