Well 3130IF, User Manual

Page: 28 / 75

3130IF -VoIP User Manual V2.0
in anything;
The system initiates Q931 signal port, the default is 1720;
Configure the net gate RAS register port for the system; terminal user can
logon to gatekeeper through RAS passage and make a request for allowing to
initiate the call request. If the request has been allowed, then the gatekeeper
will return a transport address
（
with IP address and port number
）
as the call
signaling passage of the called party;
Configure DTMF mode, RTP mode,RFC2833 mode,H245-string mode and
H245-signal mode;
Configure permission for no-registered call,allow to initiate call without net gate
register;
Early245 configuration, which means that when initiating a call, the 225
message transmission begins at the same time with 245 message
transmission, the default is Disable;
28