Well 3130IF, User Manual

Page: 67 / 75

3130IF -VoIP User Manual V2.0
67
Configure media start port and port qty. ---media-port–startport xxx –number
xxxx
Ex: WinLine<config–netservice>#media-port –startport 10000 number 200
Add router protocol ---route –gateway x.x.x.x –addr x.x.x.x –mask x.x.x.x
Ex: WinLine<config-netservice>#route –gateway 202.112.10.1 –addr
202.112.210.1 –mask 255.255.255.0
Del router protocol ---no route –gateway x.x.x.x –addr x.x.x.x –mask
x.x.x.x
Check router protocol ---route
Check net service ---show
Phone book dialing out bonding
Path: WinLine<config-pbook>#
Cancel / enable call via GK & Proxy ---[no]enableGKandProxy
Add number IP bonding ---entry-number xxx –ip x.x.x.x –porotocol xxx
Ex: WinLine<config–pbook>#entry ---number 100 –ip 202.112.20.100 –
protocol sip
Add LIFELINE number ---entry –number xxx protocol lifeline
Ex: WinLine<config–pbook>#entry ---number 110 –protocol lifeline
Add number IP bonding, and add pre-number
---entry –number xxx –ip x.x.x.x –protocol xxx_add xxx
Ex: WinLine<config–pbook>#entry - number 100 - ip 202.112.20.100 -
protocol sip_add 123( while user dialing 100, exact dialing is 123100)
Add number IP bonding, and replace old one with new one
---entry –number xxx –ip x.x.x.x –protocol xxx_all xxx
Ex: WinLine<config–pbook>#entry – number 100 – ip 202.112.20.100 –