3130IF -VoIP User Manual V2.0
68
protocol sip_all 123( user dial 100 and exact number is 123)
Add number IP bonding and deletef front X number
---entry –number xxx –ip x.x.x.x –protocol xxx_del xxx
Ex: WinLine<config–pbook>#entry – number 1234 – ip 202.112.20.100 –
protocol sip_del 2(user dial 1234, but exact number is 34)
Add number IP bonding, and replace front part number
---entry –number xxx –ip x.x.x.x –protocol xxx _rep_length xxx
Ex: WinLine<config–pbook>#entry – number1234 – ip 202.112.20.100 –
protocol_rep 567 _length 2
（
user dial 100, but exact number dialed is 56734
）
delete number IP bonding ---no entry –number xxx
check number IP bonding ---show
configure default VoIP protocol ---default–protocol xxx
Port configuration
While input PORT under terminal config, the configuration will valid to all ports,
if input as PORT X, valid only to port X. Some parameter only valid to some
port, then PORT X is needed, otherwise, error report as “Error: Missing
parameter”.
Path: WinLine<config–port># or WinLine<config–port X>#
Accecp relaymode ---accept–relay xxx
Cancel / enable polarity revise ---[no]battery-reverse
Caller ID mode ---callerid xxx
Cancel Caller ID ---no callerid
Call forwarding ---callforward –conditon xxx –number xxx –ip–port xxx
–protocol xxx
Ex: WinLine<config–port 0>#callforward –condition busy –number 100 –ip
Summary of Contents for 3130IF
Page 16: ...3130IF VoIP User Manual V2 0 16 ...
Page 17: ...3130IF VoIP User Manual V2 0 17 ...
Page 18: ...3130IF VoIP User Manual V2 0 18 ...
