WELGER RP 202 • RP 220 • RP 302 • RP 320
57
9.2.4. Twine wrapping,
automatically triggered:
Wrapping starts without any
action from the driver on
reaching the pre-selected
baling density.
The driver will be signalled to
stop driving by a continuous
tone lasting for 3 seconds.
This signal begins 2.5 sec. or
5 sec. after the start of
wrapping. The delay can be
adjusted in the set-up menu.
After completion of the twine
wrapping (twine movement
sensors indicate stoppage):
A signal sounds. Then: Open
tailgate with tractor control
valve.
As soon as lock opens:
Close tailgate after bale
ejection.
Buzzer sounds briefly after
locking the tailgate.
The bar graph display for the
bale density has dropped to
„0“.
More crop can be once again
added.
9.2.5. Net wrapping,
automatically triggered:
Wrapping starts without any
action from the driver on
reaching the pre-selected
baling density.
The driver will be signalled to
stop driving by a continuous
tone lasting for 3 seconds.
This signal begins 2.5 sec. or
5 sec. before the start of
wrapping. The delay can be
adjusted in the set-up menu.
The net clutch is activated for
a period of 5 seconds.
After completion of the net
wrapping (net cutting knife was
operated):
A signal sounds. Then: Open
tailgate.
As soon as lock opens:
Close tailgate after bale
ejection.
Buzzer sounds briefly after
locking the tailgate.
Activate the control valve for a
further 5 sec. so that the net
cutting knife* is fully tensioned.
The bar graph display for the
bale density has dropped to
„0“.
More crop can be once again
added.