TitanTig 200P ACDC
Pro
Operators Manual
Issue. A 0516
Gun switch control current (Option)
(Example shown only. Actual Torch may vary from above)
TIG mode
Connect the TIG torch leads as detailed above. Ensure that a suitable inert gas supply is
connected.
Switch the power switch on the back panel to “ON”
Select the TIG welding mode using the selector switch.
There is voltage output at both output terminals.
After the parameters are set appropriately, open the gas valve of the cylinder, the gas valve on the
torch and adjust the gas regulator to obtain the desired flow rate.
The arc will start when the tungsten electrode touches the work piece and is lifted off after
touching by between 2-4mm
The arc will cease when the electrode (torch) is moved away from the work area
Torch switch
Current adjusting button,
