TitanTig 200P ACDC
Pro
Operators Manual
Issue. A 0516
4. Tig parameter adjust
5. AC parameters:
Balance -5~+5
/ AC Frequency 50~250Hz
6. MMA parameter select:
Hot start
/MMA amps 5-270/200
/ Arc force
Pedal switch control (Option)
When plug the fourteen-lead aero-socket of
pedal switch in it. Welder will identify the
pedal switch, the welding current knob on
the front panel will can’t use
，
and only 2T
can be selected.
When use the adjustment knob of
max-welding current beside the pedal ,can
set the max-current you want.
The eighth and ninth of the fourteen-lead
aero-socket is gun switch; The first and
second of the fourteen-lead aero-socket is
short circuit; The third
、
fourth and fifth of
the fourteen-lead aero-socket is pedal
adjustable resistance.
Pre flow 0-2s
Initial Amps 5-170/200
Up slope 0-10S
Peak Amps5-170/200
Base Amps 5-270/200
Down slope 0-10S
End Amps 5-170/200A
Post flow 0-10S
Pulse off
Pulse on
Pulse duty 5-95%
Pulse frequency 0.5-200Hz
Welding current control
12 pin control connector
Max Current Control
