TitanTig 200P ACDC
Pro
Operators Manual
Issue. A 0516
Select MMA by switching to the MMA welding mode. There is voltage output at both output
terminals.
Set the amperage on the machine suitable for the electrode being used. Ensure you check that
you have the electrode polarity correct.
Please see below a guide to amperages required.
Electrode Diameter(mm)
Welding Current(A)
Electrode Diameter(mm)
Welding Current(A)
2.0
40-60
4.0
130-180
2.5
60-95
5.0
180-220
3.2
95-130
6.0
220-260
Average Thickness of
Material (mm)
Suggested Electrode
Diameter (mm)
Average Thickness of
Material (mm)
Suggested Electrode
Diameter (mm)
1.0-2.0
2.5
5.0-8.0
4.0
2.0-5.0
3.2
8.0 >
5.0
3.2 GTAW (TIG) Welding
TIG Welding
Insert the cable plug with the
work clamp into the “+”
socket on the front panel of
the welding machine, and
tighten it clockwise.
Insert the cables plug of the
TIG torch into the “-” socket
on the front panel of the
machine and tighten
clockwise.
Connect the gas hose to the
regulator / flow meter located
on the shield gas cylinder and
connect the other end to the
machine.
Open the valve on the TIG
torch and “scratch” the
electrode on the work piece
to start the arc.
The control cable of torch
switch consists of 2 wires,
