15
WT140ARC
Welding Machine
www.weldtech.net.nz
10. Transportation Methods
Lift unit with the han-
dles provided, or use a handcart or similar device of
adequate capacity. If using a fork lift vehicle, secure
the unit to a skid before transporting.
CAUTION!
Disconnect input power conductors from de-
energized supply line before moving the welding
power source.
11. Exercise good work practices.
The warnings,
precautions, and instructions discussed in this in-
struction manual cannot cover all possible conditions
and situations that may occur. It must be understood
by the operator that common sense and caution are
factors which cannot be built into this product, but
must be considered by the operator.
Welding Safety Instructions
& Warnings
WARNING!
Protect yourself and others from possible serious
injury or death. Keep children away. Read the
operating/Instruction manual before installing,
operating or servicing this equipment. Have all
installation, operation, maintenance, and repair
work performed by qualified people.
If an operator does not strictly observe all safety rules
and take precautionary actions, welding products
and welding processes can cause serious injury or
death, or damage to other equipment or property.
Safe practices have developed from past experience
in the use of welding and cutting.
These practices must be learned through study and
training before using this equipment. Some of these
practices apply to equipment connected to power
lines; other practices apply to engine driven equip-
ment. Anyone not having extensive training in weld-
ing and cutting practices should not attempt to weld.
Safe practices are outlined in the European Standard
EN60974-1 entitled: Safety in welding and allied pro-
cesses.
WARNING!
Only use safety equipment that has been ap-
proved by an appropriate standards agency.
Unapproved safety equipment may not provide
adequate protection. Eye and breathing protec-
tion must be AS/NZS compliant for the specific
hazards in the work area.
DANGER!
Always wear AS/NZS compliant safety glasses
and full face shield fitted with appropriate filter
shade number
.
(Refer Filter Table on page 17.)
CAUTION!
Heavy-duty work gloves, non-skid safety shoes
and hearing protection used for appropriate
conditions will reduce personal injuries.
CAUTION!
Have the equipment serviced by a qualified re-
pair person using identical replacement parts.
This will ensure that the safety of the power tool
is maintained.
Personal Safety
CAUTION!
Keep the work area well lit. Make sure there is ad-
equate space surrounding the work area. Always
keep the work area free of obstructions, grease,
oil, trash, and other debris. Do not use equipment
in areas near flammable chemicals, dust, and va-
pours. Do not use this product in a damp or wet
location.
1. Stay alert, watch what you are doing and use
common sense when operating equipment. Do
not use a tool while you are tired or under the
influence of drugs, alcohol or medication. A mo-
ment of distraction when operating equipment
may result in serious personal injury.
2. Do not overreach. Keep proper footing and bal-
ance at all times. This enables better control of
the power tool in unexpected situations.
Arc Rays can Burn Eyes and Skin
DANGER!
Arc rays from the welding process produce
intense heat and strong ultraviolet rays that can
burn eyes and skin.
1. Use a Welding Helmet or Welding Face Shield fit-
ted with a proper shade filter (refer AS 60974-1,
AS/NZS 1337.1 and AS/NZS 1338.1 Safety Stand-
ards) to protect your face and eyes when weld-
ing or watching. (See Filter Table on Page17).
2. Wear approved safety glasses. Side shields are
recommended.
