Use a ventilating fan to remove fumes from the breathing zone and cutting area.
If adequacy of ventilation or exhaust is uncertain, have your exposure measured and
compared to the Threshold Limit Values (TLV) in the Safety Data Sheet (SDS).
Arc rays can burn eyes and skin.
Use welding helmet or face shield with correct shade of filter (see Section to choose the
correct shade).
Wear welders cap and safety glasses with side shields. Use ear protection when cutting
out of position or in confined spaces. Button shirt collat.
Wear body protection made from durable, flame-resistant material (leather, heavy cotton,
wool). Body protection includes oil-free clothing such as leather gloves, heavy shirt, cuffl-
ess trousers, high shoes, and acap.
Loose or incorrect hardware and fasteners can injure, and damage equipment.
Periodically double-check all nuts and bolts for tightness and condition
If necessary, always replace any fastener with one of
equal size, grade, and type.
Be sure the grade marks on replacement fastener
match the original bolt. The manufacturer's
identification mark .
12
Summary of Contents for TIGACDC250GD
