WELDMAN
POWER PULSE DC TIG 200 HF / LIFT
3
III. SPECIFICATIONS WELDERS:
III. SPECIFICATIONS WELDERS:
MODEL
POWER DC TIG 200
GENERAL
POWER SUPPLY VOLTAGE
230V / 50Hz
POWER PROTECTION
20 A
TIG
MMA
CURRENT CURRENT MAX POWER
28.6 A
36.6 A
CURRENT INTENSITY POWER EFF.
14.3 A
20 And
VOLTAGE POWER IDLE
62 V
TIG WELDING PARAMETERS
5-200 / 10,2-18V
EFFICIENCY (at 40 ° C)
60%
100%
Welding current
120 A
100 A
Welding voltage
14.8 V
14 V
MMA WELDING PARAMETERS
5-170A / 20,2-26,8V
EFFICIENCY (at 40 ° C)
60%
100%
Welding current
200 A
156 A
Welding voltage
28 V
26.2 V
arc ignition
HF
ELECTRODE DIAMETER
1.0-4.0
COOLING
FAN
INSULATION CLASS
IP23
DEGREE OF PROTECTION
F
DIMENSIONS
43x14x25cm
WEIGHT
7.5 kg
Duty cycle is based on the percentage distribution of 10 minutes for the
time in which the machine can weld at rated current welding without
interruption. Duty cycle of 60% means that after 6 minutes of operation is
required for 4 minute interval in order to cool down. Time cooling device
can sometimes
reach up to 15 minutes. Duty cycle 100%
It means that the device can be operated continuously without interruption.
The device has a built-in thermal sensor. In case of overheating, the unit
automatically turns off. In the case of actuation of the overload mechanism,
wait 15 min. to cool the device. After this time should be reduced welding
current, and you can proceed to further work.
IV. BUILDING:
IV. BUILDING:
