Page 9
Figure 2.2
Tig welding connection diagram
2-3. Install procedure
2-3.1. Welding machine should be installed in a stable position and with good
ventilation. Avoid direct sun outdoors. Avoid transport in invert or side position.
2-3.2. Connect torch, earth cable, according to connection diagram. Insert Electrode
holder/earth clamp quick connector into receptacle and turn 90
º
clockwise.
2-3.3. Commission the machine after the machine is installed and tested.
Gauge
Ar gas
Cylinder
Power cord
Tig torch
Work piece
Earth clamp
Foot pad or
remote controller