© Welding Industries Malaysia Sdn. Bhd. reserves all rights even in the event of industrial property rights. We reserve all rights of disposal
such as copying and passing on to third parties. Specification may vary from country to country.
V1.1.07
4
3-0
MACHINE CONTROLS/CONNECTIONS
1. TORCH HOLDER FIT ON THE SIDE COVER RIGHT AS POINT AT THE DRAWING
2. VOLTAGE SELECTOR SWITCH
- Coarse control 10 steps
3. ON/OFF SWITCH
- With this switch is in the ON position, power is applied to the fan and control circuits.
WARNING: This switch does not isolate the unit from the mains electrical supply.
4. DC AMMETER
- Show the welding current.
5. OVERHEAT INDICATOR (LED)
6. FUSES
7. NEGATIVE TERMINAL (CO
2
)
8. SPOT TIME ADJUSTOR
9. STITICH TIME ADJUSTOR
10. WIRE FEED SPEED ADJUSTOR
11. FUNCTION SELECTOR SWITCH
To select the modes of the machine i.e. continuous, spot or stitich.
12. CENTRAL ADAPTOR
3
4
5
6
8
7
9
10
11
12
