© Welding Industries Malaysia Sdn. Bhd. reserves all rights even in the event of industrial property rights. We reserve all rights of disposal
such as copying and passing on to third parties. Specification may vary from country to country.
V1.1.07
15
10-0 SAFETY OBSERVATION
Support the gas cylinder
with chain provided in the
machine
Protect eyes and open cylinder
valve to remove any dirt in valve
socket.
Fit gas regulator to cylinder
head and tighten using correct
size spanner. OVERTIGHTEN
will cause ‘O’ RING in the
regulator to spoil.
Open cylinder valve and
check the cylinder valve
pressure ( Must be greater
than 10bar 150Ib/in
2
)
Shut the cylinder valve.
Fit gas hose to regulator and
open cylinder valve. Set flow
15Lt Min. Bigger torch may
need 20Lt Min.
Clean the material to be
welded with a wire brush.
Place the earth lead clamp on a
clean area of the work piece.
Keep the gap between pieces
to be welded to a minimum.
Ensure a fire
extinguisher is
nearby in case
of fire.
Clean the welding
area and check a fire
extinguisher is
available.
