Day & Night 10X Zoom Camera
9
5.3 Rear (Key Function)
u
BLC Key Button
BLC Key operates BLC OFF-BLD HIGH in order of precedence.
v
NEAR Key Button
Press NEAR Key to focus the lens to far subject.
This button is used for right in the menu mode.
w
SHUTTER Key Button
SHUTTER speed can be changed each time when pressing the button.
Displays operates in order of
percedence o
f ESC, 1/60, 1/100, 1/120
1/250, 1/500, 1/700, 1/1000, 1/1600, 1/2500, 1/5000, 1/7000, 1/10000.
x
FAR Key Button
Press FAR Key to focus the lens to far subject.
This button is used for left in the menu mode.
y
TELE ZOOM Key Button
When pressing TELE ZOOM key user preset 1 value displays on the screen.
After 10 second, user preset 2 value displays on the screen.
This function repeats each time when pressing the Tele zoom key.
z
SETTING Button
SET Button: Used for the menu display. This button can be used to confirm settings after changing the value of the selected
function or current conditions.
TELE & WIDE Button: Used for selecting items by moving the cursor up or down on the menu screen.
NEAR & FAR Button: Used when changing items values, by moving the cursor to the left or right on the menu screen.
N
B
T
S
A
F
Z
W
NEAR
BLC
TELE
SHUTTER
FOCUS
ADJUST
FAR
TELE ZOOM
WIDE
ZOOM
Day & Night 10X Zoom Camera
8
5.0 Names and Functions of Parts
5.1 Front
u
Lens protection cap
Please cover the lens when not using it.
v
Green LED
In RS-485, LED turns ON/OFF when receiving specific data.
w
Yellow LED
In RS-485, LED turns ON/OFF when receiving specific data.
5.2 Top & Bottom
x
Mounting bracket screw hole
Mounting bracket screw hole
please use the screw hole when fixing the camera onto the mounting bracket.
please use the clamp screw as specified below.
q
The mounting bracket can be separated and attached to the top of the camera.
In this instance please do not tighten the screw to a depth of more than 5mm
otherwise serious damage can occur to the inside of the camera.
y
Video output & Power input terminal
Sends video signal and connectors to the video input terminal of the monitor.
Receives power and connectors to the video input terminal of the monitor.
Pin
1
2
3
4
5
6
Description
TRX- (RS-485 -)
TRX+ (RX-485 +)
NC
GND
VIDEO
DC 12V
Day & Night 10X Zoom Camera
7
4.0 Components
10X Zoom Camera
WDN-1003XP
Screw
Mount Bracket
Cable
Operation Manual
Please read carefully before using and keep in a safe place.
Design and specifications are subject to change without notice.
Operation Manual
High Resolution
Day & Night 10X Zoom Camera
WDN-1003XP
V.07C
