ENGLISH
OM-235 816 Page 7
C. Connecting Torch With Flow-Through Type Connection
!
Turn Off welding power source
power before installing torch.
Obtain the following hose:
1
Gas Hose With 5/8-18 Right-
Hand Fittings
2
Regulator/Flowmeter
3
Gas Cylinder
4
Welding Power Source
Connections:
5
International Style Flow-
Through Connector
6
One-Piece Torch Cable
7
14-Pin Or 6-Pin Plug
Connect one-piece torch cable to in-
ternational style flow-through con-
nector (see Section 3-2).
Connect international style flow-
through connector to weld output
terminal.
Connect 14-pin or 6-pin plug to
matching receptacle on power
source.
Operation:
8
Contactor Control Switch
Use switch to turn torch on/off.
9
Amperage Control Dial
Turn dial to control amperage.
10 Work Clamp
Connect work clamp to clean, paint-
free location on workpiece, close to
weld area.
Use wire brush to clean metal at weld
joint area.
11 Foot Control
Use of foot control is optional.
805 065-A
Tools Needed:
5/8, 7/8 in.
1
2
3
4
6
7
5
8
9
10
11