Floodlight Range Installation Guide
Zone 1 variant CML13ATEX3007 or IEC Ex CML14.0001 or CML 21UKEX3099
Zone 2 variant CML17ATEX4231 or IEC Ex CML 17.0135 or CML 21UKEX4106
This installation guide provides instructions for installing the RF series of
explosion protected floodlights.
Text in
Bold
is specific for emergency variants
Overview
1
Safety Instructions
2
Installation
3
Maintenance
4
Technical Specification
5
Trouble Shooting
Important information
The RF series of explosion protected floodlights are specialist devices, certified for use
in specific operating environments.
The units must be installed in accordance with these instructions, must be correctly
certified for the specific operating environment and must be installed by suitably
qualified personnel.
Emergency floodlights will require the fuse to be reconnected upon installation
and the floodlight subjected to three 24 hour charge/discharge cycles to bring
the battery up to peak capacity.
If you have any queries about the installation or the certification of the unit – please
contact Nemalux for immediate assistance and advice.
R
F
Series
rev. A-
2
1
1
-
1
2
www.nemalux.com | [email protected] | Tel 403•242•7475 | Fax 403•243•6190
SUBJECT TO CHANGE WITHOUT NOTICE
MADE IN
UK
