background image

instructions for

Aluminium torch 10w t6 cree led 

AdjustAble focus 3 x d cell 

model no: 

led448

thank you for purchasing a sealey product. manufactured to a high standard, this product will, if used according to these 

instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT:

 PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE 

THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR 
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1.  sAfety    

1.1.    

General

 

8

  

do not

 shine directly into your, another person’s or  an animal’s eyes.

 

8

  

do not

 allow children to use the torch.

 

8

  

do not

 use the torch if you suspect that the battery or the torch casing is damaged.

 

8

  

do not

 leave batteries in a discharged state. Before storage remove batteries and dispose of in the correct manor.

1.2.    

battery safety

 

‰

  

wArninG!

 To reduce the risk of burns or fire:

 

8

  

do not

 attempt to open the batteries.

 

8

  

do not

  crush, puncture, short contacts or dispose of in fire or water.

 

8

  

do not

 expose to temperatures above 60°c (140°).

  

replace only with the batteries designed for this product.

  

recycle or dispose of used batteries as stipulated by local regulation.

  

if the electrolyte in the batteries gets on your skin, thoroughly wash with soap and water. if it gets in your eyes, rinse thoroughly with      

 

cool water and seek immediate medical attention.

2.  introduction

single 10W t6 cree led produces extremely bright, white light with an output of 680lumens and a working range up to 200 metres. focus 

type can be changed from spotlight to wide area by twist/slide action of the head. lightweight aluminium housing. two function on/off push 

button for full and 30% energy saving mode. Powered by 3xd batteries.(batteries not included)

3.  specificAtion

model no

: .................................................................

led448

led: ................................................................10W t6 cree

lumen out (high/low): ........................................680lm/200lm

Battery .................................................... 3 x d (not included)

Working range: ..........................................................200mtr

led448 | issue 1 27/05/16

Original Language Version

© Jack sealey limited

      refer to

   instructions

on/mode change/off

Button

Battery compartment 

screw cap

twist/slide head

   fig.1

Reviews: