WF-201
T AC/DC
© Weldclass 2019 | E.&O.E.
21
Code
Error
Solution
E20
Button/Control system error on Control
Panel during start-up
Try turning machine off for 10 seconds and
the back on.
E21
Button/Control system error during
start-up (not on Control Panel)
Try turning machine off for 10 seconds and
the back on.
E22
Welding torch error during start-up
Try turning machine off for 10 seconds and
the back on.
Ensure torch is connected correctly.
Disconnect & reconnect welding torch.
Replaced welding torch.
E23
Welding torch error during welding
Table 3
If you are unable to resolve the error by restarting the machine or with any of the above
solutions, contact your WeldForce distributor to arrange to have the machine assessed by a
technician.
