Welch Allyn SCANTEAM 2070 BASE, Manual

Page: 47 / 108

3–15 Cordless Systems Manual
Require
✱
Don’t Require
Aux Require Data Format?
Enter Aux Data Format
]
Aux Data Format Editor
When Data Formatter is required, all input data must conform to an edited format
or the Cordless System will not transmit the input data to the host device.
See pages 3–14 and 3–16 through 3–17 for a description of this selection,
commands, and examples.
✱
Enable
Disable
Aux Data Formatter
When Data Formatter is disabled, the incoming data will be output to the host as
received (including prefixes and suffixes).
]
One or more two-digit numbers and Save are required after scanning this
programming bar code. Refer to the Programming Chart (inside back cover).
Save Current Changes Discard Current Changes
Clear One Data Format
]
✱
Default Data Format
(none)