Welch Allyn SCANTEAM 2070 BASE, Manual

Page: 49 / 108

3–17 Cordless Systems Manual
You are sending five digit data into the Auxiliary Port; however, your host system
can only accept data which has eight digits. You must add three zeroes to the
beginning of the Aux Port data.
Aux Data Formatter Example
H
Scan the
Enter Aux Data Format bar code (page 3–15).
H
Scan the
99 bar codes for Universal Terminal Type.
Refer to the Aux Format Editor Commands Chart on page 3–16 to format the
following example. The programming bar codes on page 3–15, and the
alphanumeric bar codes on the inside back cover are used to program the data
formatter.
H
Scan the 72 bar codes, the Hex value for the Auxiliary Port.
H
Scan the 0005 bar codes for the data length.
H
Scan the F4 (send XX character NN times command) bar codes, scan 30
bar codes (the Hex value for a zero), scan 03 bar codes (send three times).
H
Scan the
Save bar code to end Aux Format Editor selection.
The following are the Aux Editor Command Sequences:
Received Must send
12345 00012345
H
Scan the F1 and 00 bar codes to send all data followed by a NUL (NUL= 00
in Hex value).