Welch Allyn ProBP 2000, Directions For Use Manual

Page: 16 / 39

3. Replace the cover.
Position the blood pressure cuff on the patient
Before taking an NIBP measurement, follow these steps to properly attach the cuff to
the patient. For information about obtaining blood pressure measurements, refer to
Blood pressure guidelines at: https://www.welchallyn.com/probp2000 .To achieve an
accurate blood pressure reading, follow these steps to position the blood pressure cuff
properly.
1. Place the cuff on a bare arm.
2. Use the proper size cuff. If two cuff sizes fit, use the larger one.
3. Place the artery marker over the brachial artery.
4. Apply the cuff snugly, allowing room for no more than two fingers.
5. Once the cuff is placed, allow the patient to sit quietly for five minutes.
6. Do not talk to the patient while taking the blood pressure.
7. Support the patient's back with feet on the floor during the measurement. Keep legs
uncrossed.
8. Keep the upper arm at heart level and passively support the lower arm.
9. Keep the arm still during the measurement cycle.
12 Introduction Welch Allyn ProBP™ 2000 Digital Blood Pressure Device