Welch Allyn ProBP 2000, Directions For Use Manual, Page: 17 / 39

Maintenance
Maintain the device
The device does not require calibration.
To get the best performance from your device, follow the maintenance steps below.
•
Store the device in a dry place away from direct sunlight.
• Avoid shaking and dropping the device.
• Avoid operating the device in dusty and unstable temperature environments.
Visible soil must be removed prior to cleaning and disinfection. The use of approved
wipes (EPA or equivalent International Agency) containing 70% isopropyl alcohol or 10%
chlorine bleach can be used to clean and disinfect the device. Follow the wipe
manufacturer's directions for optimum results.
Cleaning
CAUTION Use a soft cloth to clean the entire unit. Do not use any
abrasive cleaners.
CAUTION Quaternary Ammonium cleaning products are not
recommended as they may cause the plastic to crack.
Clean the device only when necessary with one of the following compatible cleaning
agents:
•
70% isopropyl alcohol
• 10% chlorine bleach/90% water solution (standard bleach wipe)
Storing the equipment
When storing the device, power cord, and accessories, observe the environmental
storage conditions that are identified in the product specifications.
Disposing of electronic equipment
This product and its components must be disposed of according to local laws and
regulations. Do not dispose of this product as unsorted municipal waste. For more
specific disposal or compliance information, see www.welchallyn.com/weee, or contact
Welch Allyn Customer Service.
13