G
ESD SHIELDS (CE MODEL)
REMOVAL OF ESD SHIELDS (SEE FIG. G-1)
G
1.
REMOVE POWER SUPPLY BOARD.
FOLLOW INSTRUCTIONS IN SECTION B.
G
2.
REMOVE MOTOR PUMP ASSEMBLY.
FOLLOW INSTRUCTIONS IN SECTION C.
G
3.
REMOVE MCU BOARD.
FOLLOW INSTRUCTIONS IN SECTION D.
G
4.
REMOVE KEYPAD ASSEMBLY.
FOLLOW INSTRUCTIONS IN SECTION E.
G
5.
REMOVE LCD ASSEMBLY.
FOLLOW INSTRUCTIONS IN SECTION F.
G
6.
REMOVE ESD SHIELDS.
THE LCD GASKET AND THE ESD SHIELD ARE CONNECTED WITH TWO
STRIPS OF ESD TAPE. THESE ASSEMBLED SHIELDS SHOULD PULL
OUT OF THE BOTTOM HOUSING.
NOTES:________________________________________________________________________
_____________________________________________________________________
REPLACEMENT OF ESD SHIELDS (CE MODEL)
G
17.
REPLACE SHIELDS AS PER ASPEC A02727.
G
17.
REASSEMBLE UNIT.
FOLLOW STEPS G1 THROUGH G6 IN REVERSE ORDER.
FIG. G-1 HANDLE CE LABEL
6
