Page 5
990242 Rev. A
3
Controls and
Connectors
The diagram on page 8 illustrates the external controls, indicators, and connectors for the Kreativ
Models
Mach 4.0
and
4.1
units. The following describes their functions.
Names and Functions
#1. Unit POWER Switch;
In the ON position, this switch activates the main power to the unit.
#2
Green POWER Indicator LED
This LED illuminates when the unit POWER switch is in the ON position indicating that
electrical power is ON..
#3
Beam Intensity Control:
( Continuously variable from 1-10 (approximately 0 to 7
grams/min.)
This knob adjusts the desired rate of powder flow. To operate, begin with minimum abrasive
powder flow and increase until the desired cutting effect is achieved.
#4
Air Pressure Gauge:
Indicates amount of air pressure supplied to the Mixing Chamber and ultimately to the handpiece.
For normal operations, 50-80 psig (345 to 550 kPa) is used. For certain operations a lower or
higher pressure may be desirable.
#5
Particle Energy Control:
Adjusts output air pressure which is indicated on the Air Pressure Gauge.
Summary of Contents for Kreativ Mach 4.0
Page 10: ...Page 8 990242 Rev A...
Page 18: ...Page 16 990242 Rev A...
