Obtain measurement
With the original SENSE ON patent technology, the scale automatically powers on when
you step on the platform in your bare feet.
1. Step on the platform in your bare feet.
The scale automatically powers on and begins the measurement.
2. Stand still and keep full contact with the scale until the LCD stops blinking and
displays the weight.
Stop a measurement
You can stop a measurement before it is complete.
Step off the platform.
The scale returns to a ready / zero state.
After approximately 2 seconds, the scale powers down automatically.
Maintain the scale
Warning
Injury risk. Keep the device clean. Contact with a contaminated
device can spread infection. Clean the device after each use.
Note
The Home scale does not require calibration.
To get the best performance from your Home scale, follow the maintenance steps
below.
•
Store the device in a dry place away from direct sunlight.
•
Avoid shaking and dropping the device
•
Avoid operating the device in dusty and unstable temperature environments.
CAUTION
Use a soft cloth to clean the entire device. Do not use any
abrasive or volatile cleaners.
The following agents are compatible with the device:
•
70 percent isopropyl alcohol
•
10 percent chlorine bleach/90 percent water solution
1. Clean the Home scale only when necessary with one of the compatible cleaning
agents listed above.
2. If necessary, wipe the device with a soft, damp cloth.
Troubleshooting
This section includes a list of error messages and frequently asked questions for
problems you may encounter with your Home scale. If the device is not operating as you
think it should, check here before arranging for servicing.
Directions for use
Use the scale 9
