Use the scale
Startup
The Welch Allyn Home scale uses SENSE ON™ technology to turn on the scale. Step on
the scale with bare feet to begin a measurement.
Insert or replace the batteries
CAUTION
When the
symbol appears, the device will power off
in four seconds. Replace the old batteries with a new set of four batteries.
Always replace all four batteries with new batteries. Do NOT mix old
batteries with new batteries.
CAUTION
Remove the batteries if the device is not to be used for some
time.
CAUTION
Dispose old batteries by following your local recycling
guidelines.
CAUTION
Do not burn batteries. Batteries may leak or explode.
1. Open the battery door on the under side of the scale.
2. Insert the four AAA alkaline batteries (1.5V each) into the battery compartment
according to the polarity indications marked inside the battery compartment.
3. Close the battery door.
4. Wait until the digits “0.0lb”appear on the LCD screen.
Install the carpet feet
Install the carpet feet if you use the device on carpet to avoid the device slipping.
1. Peel off and removethe rubber stickers on the four corner posts.
2. Remove the four carpet feet from the packaging.
3. Insert the carpet feet prongs into the posts.
7
