Pair a smartphone, a tablet, or a communication hub with
the scale
Advanced
Bluetooth
4.0 technology enables your smartphone, tablet, or a
communication hub to receive your personal health information from your device. You
have two alternatives to pair your device with these devices.
•
If you are using the Welch Allyn Home application, follow the pairing instructions
presented in the application.
•
Contact your Remote Monitoring Solution provider or use the instructions that office
provided to set up these communications devices.
With either alternative, you complete the same steps on the Home scale.
1. Confirm that both the smart device and the Home scale are powered on.
Note
Bluetooth
wireless connectivity is only available for devices
which support
Bluetooth
4.0 technology.
2. Press and hold the Unit / Power button on the bottom of the scale for 3 seconds.
The
Bluetooth
pairing sequence is activated. The dotted line surrounding the
Bluetooth
symbol flashes while discovering the weight scale.
If successful, a steady
symbol surrounded by a dotted line appears on the scale's
LCD screen. If unsuccessful, the
appears.
Select the measurement unit
The default measurement unit is pound (lb).
Press the Unit / Power button on the bottom of the scale to change from pound (lb)
to kilogram (kg).
Ensure accurate measurements
To ensure the accuracy of measurements, follow the recommendations below when you
start a measurement.
•
Place the scale on a flat, hard surface for at least 10 seconds. Obtaining the
measurement immediately after placing the scale on a flat, hard surface may affect
the accuracy of the measurement.
•
If you place the scale on carpet, fit the extension feet before taking the
measurement. Placing the scale sensors directly on carpet may affect the accuracy
of the measurement.
•
Always start a measurement at the same time on the same scale located on the
same flat surface.
8 Use the scale
Welch Allyn Home™ Scale
