Welch Allyn GSI 38, Service Manual

Page: 28 / 96

PRINTING TEST RESULTS
The printout will begin with a header if it is selected during the program mode (i.e., GSI
38 or a custom header designed by you). The next two lines contain space for entering
the individuals name and the test date. This is followed by the test results in the order
that they were obtained/selected.
Either a single test can be printed from memory or the entire group of tests in memory
can be printed. To print a single test from memory, use the PAGE pushbutton to arrive
at the desired test result to print. Once this test is displayed, press the PRINT
SCREEN pushbutton.
To print all tests in memory, simply select the PRINT ALL pushbutton. When
PRINT ALL is pressed and two audiogram tests are stored in memory, they will combine
under the following conditions. There must be one left test and one right test
sequentially stored in memory. A left and right audiometric pair of tests will not be
combined if they are separated in the memory by a tymp test. Therefore, when tests
are erased, the resorting could cause a change in left, right or right, left combined when
PRINT ALL is selected. Prior to selecting PRINT ALL the operator should scroll
through the tests in memory to determine where the audiometric tests are located. This
will help the operator to avoid combining tests from different patients.