Welch Allyn ELI 150, Service Manual

Page: 27 / 104

Section 3
3-7
Configuration Page 1
Software Version
The displayed number identifies the firmware version of your electrocardiograph.
Cart Number
Cart numbers indicate which electrocardiograph transmitted a particular ECG.
Site Number
This option identifies the site of your ELI 150. Site numbers designate the hospital, clinic, or institution for ECG
records stored in a Mortara Instrument, E-Scribe data management system and must be defined for transmitting and
retrieving ECGs from the data management system. You can use up to four digits for the site number, numbers
from 0 –4095 are supported.
Site Name
This option defines your clinic, hospital, or office name. You can enter up to 30 alphanumeric characters. The site
name prints at the bottom, left edge of the ECG printout.
Telephone Number
This option specifies the telephone number for modem transmission (to another unit or to an E-Scribe data
management system). Enter up to 30 alphanumeric characters, and use the
BACKSPACE

key to erase entry
errors.
To wait for an additional dial tone, use the letter W . For example, you may need to dial a 9 to get an outside line.
EXAMPLE: 9 W 14145554321
To insert a pause use a comma ( , ).
To change tone dialing to pulse dialing, use the letter P .
EXAMPLE: P 14145554321