EMC guidance and manufacturer’s
declarations
EMC compliance
Special precautions concerning electromagnetic compatibility (EMC) must be taken for all
medical electrical equipment. This device complies with IEC EN 60601-1-2:2007.
•
All medical electrical equipment must be installed and put into service in accordance
with the EMC information provided in this document and the
Welch Allyn Connex
Devices Directions for Use
.
•
Portable and mobile RF communications equipment can affect the behavior of
medical electrical equipment.
The monitor complies with all applicable and required standards for electromagnetic
interference.
•
It does not normally affect nearby equipment and devices.
•
It is not normally affected by nearby equipment and devices.
•
It is not safe to operate the monitor in the presence of high-frequency surgical
equipment.
•
However, it is good practice to avoid using the monitor in extremely close proximity
to other equipment.
Emissions and immunity information
The ECG module is designed for and has been tested as part of a Connex Devices
system (Connex Vital Signs Monitor or Connex Integrated Wall System). Therefore, the
Emissions and immunity information provided for Connex Devices includes the
connected ECG module accessory. For information about electromagnetic compatibility
(EMC) of this system, see the Welch Allyn website:
http://www.welchallyn.com/emc-CVSM-CIWS
You can order a printed copy of the Emissions and immunity information from Welch
Allyn for delivery within 7 calendar days.
27
Summary of Contents for Connex ECG Module
