Welcat GTX-221-G, User Manual, Page: 98 / 244

Chapter 4 System Menu 4-1 Using the System Menu
GTX-221-G User
’
s Manual
97
●Enter Alphabets
Press the【SF】key to switch to the alphabetic input mode (cursor:■(rectangle).
Keys that can be used:【2】
–
【9】keys
•
When entering alphabets that are assigned to the same key, press the【 】key to move
the cursor, and then enter the next alphabet.
•
Press the【 】/【
▼
】key to toggle between upper case and lower case for the alphabet
at the cursor position.
＊2
●Enter Symbols
Press the【SF】key to switch to the alphabetic input mode (cursor:■(rectangle).
Key that can be used:【0】key
•
When entering symbols that are assigned to the same key, press the【 】key to move the
cursor, and then enter the next symbol.
•
If you press the【 】key when the cursor is located at the end of the entered data string,
a space will be inserted to the right of the cursor.
＊2
●Confirm the Data Entered
Press the【ENT】key.
●Delete Characters
＊3
•
Press the【BS】key to delete the character at the location of the cursor.
•
Press the【C】key to delete all the entered characters.
●Cancel the Entry
•
For items where you cannot delete the characters
＊3
, press the【C】key to immediately
stop your entry.
•
For items where you can delete the characters, press the【C】key after deleting all the
characters entered.
●Other
When the number of characters exceeds the entry limit, the cursor will return to the starting
point.
*1 For items that have restrictions on the types of characters that can be entered (e.g.,
only numerals for terminal ID), the input mode cannot be switched.
*2 The number of characters you can enter may vary depending on the items.
*3 You cannot delete characters on items that have a fixed entry format (e.g., local BD
address).This manual uses the following delete-disabled icon for items with a fixed entry
format.