Welcat GTX-221-G User Manual Download Page 31

Page: 31 / 244

Chapter 1 Hardware

1-1 About the Handy Terminal

GTX-221-G User

’

s Manual

No.

Name

Description

⑩

Lock Lever

Locks/releases

the

battery

cover.Moving

the

lever

the

direction

of the arrow locks the cover.

⑪

Battery Cover

This is the cover of the battery pack compartment. A function has

been included for detecting whether the battery cover has been

closed

properly.

The

Handy

Terminal

cannot

started

the

cover

is not closed properly.

⑫

Charging Terminal

Charging terminals for both single chargers and multi chargers.

⑬

Product Name Plate

Provides product name, manufacturer

’

s name, laser warning, etc.

⑭

microSD Card

Slot

Used for inserting a microSD card.Lift the cover and insert the

card.

⑮

Electrodes

Electrodes to draw power from the battery pack.

⑯

Battery Pack

The supplied lithium ion secondary battery.

⑰

Serial Number Seal

Displays the serial number.

Please provide this serial number in case of any product-related

inquiry.

⑱

Hand Strap

Used after being attached to

Hand Strap Attaching Hole.

Summary of Contents for GTX-221-G





















































































































































































































































Welcat GTX-221-G, User Manual, Page: 31 / 244

Search results

Summary of Contents for GTX-221-G

Reviews: