Welcat GTX-100, User Manual

Page: 144 / 171

3-16 Test Menu
3-89
■AP Search
To search the access point matches the SSID setup on the terminal.
When the SSID of the terminal is setup to "ANY", it is possible to search all the access points around
there.
This is only performed when the setup at the access point, is set up
as respond to "ANY". From security's point of view, the response to
"ANY" may be disabled.
Displayed contents as a result of searching are MAC address, channel, SSID.
1. Select "3:AP Search".
#2UGCTEJ
5GCTEJKPI
2. The result of searching is displayed after several seconds to some ten seconds.
5GCTEJTGUWNVU
#(&%'
#(&(
#(&&
ǽ2TQRGTV[
(
<1st line> The title of the test result.
<3rd line or after> The MAC address of the detected access point
and the channel number.
<10th line> The key guidance that displays SSID.
3. Press the key, and the SSID set up at the selected access point is displayed.
5GCTEJTGUWNVU
#(&%'
#(&(
#(&&
ǽ2TQRGTV[
(
55+&)6:
1-