Welcat GTX-100, User Manual

Page: 44 / 171

1-7 Battery pack (GTB-1)
1-21
1-7 Battery pack (GTB-1)
1-7-1 Charging the Battery Pack
Be sure to follow the precautions below when handling the battery pack.
・
After purchasing, be sure to fully charge the battery pack before using.
・
Be sure to shut off the power before removing the battery pack. If the battery pack is removed during
operation, the data file in the S drive may be corrupted.
・
Be sure not to touch the electrodes with your hand, and avoid dust on the electrodes. Otherwise this
may cause poor contact with the battery pack and the GTX-100.
・
When dirty, wipe clean with a dry soft cloth.
・
When installing and removing the battery pack, use a desk or other appropriate surface as the working
table so that it cannot fall onto you feet.
・
Be sure to attach the battery cover and lock it before use.
1-7-2 Installing and Removing a Battery
A packing material to protect the water immersion is attached to the Battery cover. When installing the Battery
cover, please confirm if the dust or dirt NOT attached to the packing or the packing inserted correctly. If the dust
or dirt is attached, wipe it softly with dry clean cloth.
■Removing the Battery Pack
2.Remove the battery
cover.
1.Release the lock by
sliding up the lock
lever.
3.Take out the battery pack
from electrodes side.