Welcat GTX-100, User Manual

Page: 96 / 171

3-10 Network Menu
3-41
3-10-4 DNS
Set the DNS server address, as described below. Automatic setup is possible when the DHCP function (P.3-36)
is enabled.
1. From the Network, select "4:DNS".
2TKOCT[
ᵘᵚ
&05
5GEQPFCT[
ᵘᵚ
#FXCPEGF
2. Select the item to setup.
●Primary
Set the IP address for the Primary server.
●Secondary
Set the IP address for the Secondary server.
●Advanced
・ Server port
Specify the control port number for the DNS server. The well-known port is 53.
・ Time out time
Setup range is from 1 to 99 seconds. Set the response packet waiting time.
・ Trial count
When 0 is set, only one packet is transmitted without RETRY.
・ Cache time
Setup range is from 0 to 9999 min. When 0 is setup, the cache function is disabled. The MAX
value allowed to enter to the cache table is 8. When the entered number is over the MAX value,
a new entry will be performed after discarding the old entry.