background image

40

FCC Statement

NOTE:

POTENTIAL FOR RADIO/TELEVISION INTERFERENCE 
(for U.S.A. only)

This product has been tested and found to comply 
with the limits for a Class B digital device, pursuant 
to Part 15 of the FCC rules.

These limits are designed to provide reasonable 
protection against harmful interference in a 
residential installation. This equipment generates, 
uses and can radiate radio interference energy and, 
if not installed and used in accordance with the 
instructions, may case harmful interference to radio 
communications. However, there is no guarantee 
that interference will not occur in a particular 
installation. If this equipment does cause harmful 
interference to radio or television reception, which 
can be determined by turning the equipment off  
and on, the user is encouraged to try to correct 
the interference by one or more of the following 
measures:

• 

Reorient or relocate the receiving antenna.

• 

Increase the separation between the equipment 
and the receiver.

• 

Connect the equipment into an outlet or on a 

13400 EN Aldi US RC6 Content.indd   38

13400 EN Aldi US RC6 Content.indd   38

20.04.11   09:52:19

20.04.11   09:52:19

Summary of Contents for MD 1010















































Reviews: